Dodge Challenger SRT10 – The opportunity for SRT engineering to “one-up” itself comes to fruition with the 2009 Dodge Challenger SRT10 Concept. Power for the 2009 Dodge Challenger SRT10 Concept comes from the Dodge Viper 8.4-liter, all-aluminum V-10 engine with 600 horsepower and 560 lb. ft. of torque. This new halo concept delivers the well-known SRT credo of benchmark performance. The Dodge Challenger SRT10 Concept includes a fresh coat of Tornado Red paint with a carbon-fiber deck lid and hood. The “shaker hood” is a nostalgic representation of the 1970 HEMI Cuda, giving the 600-hp Viper V-10 engine room to breathe. Brakes have been upgraded and BILSTEIN® shocks at all four corners improve handling balance. The interior boasts sport seats and carbon-fiber accents throughout and, of course, true to the Viper-powered vehicle lineage, a red engine start push-button in the dash.
Dodge Challenger Blacktop
A menacing creation from the minds of the Mopar Underground design team. The Dodge Challenger Blacktop began life as a 2009 Dodge Challenger R/T equipped with a 5.7-liter HEMI® V-8 and six-speed manual transmission. Mopar Underground added custom-made spoilers and front brow. To finish off the look, a black-on-black racing stripe paint scheme was added. The “in the weeds” stance and superb handling characteristics are accomplished by the Mopar coil-over suspension and strut tower brace. Blacktop rolls on massive 22-inch Dodge Viper wheels from Factory Reproductions wrapped in Dunlop tires measuring 265/35 R22 front and 305/30 R22 rear. To ensure the powertrain can keep up with the suspension, underhood performance is enhanced. The addition of Mopar components, including a cat back dual-exhaust, cold air intake, allow the HEMI V-8 to breathe easy. The interior has been enhanced with Katzkin leather seating finished in bright red plus a Mopar Kicker audio system for premium sound.
Dodge Challenger Targa
The Dodge Challenger Targa is a full-blown competition car that raced and completed the infamous Targa Newfoundland race this year. “Samantha” started life as a Mopar Challenger drag race package car. Many features were borrowed from the Dodge Viper, but the most noticeable is the snakeskin green paint. To keep the front end down, a Mopar chin spoiler “Splats“ developed in a full scale wind tunnel, was added to the front of the car. Mopar gauges keep a close eye on the vital signs. The Mopar hood is equipped with a scoop to make room for the 540-horsepower, 490 lb. ft. of torque, 392 HEMI® V-8 Mopar crate motor. Mated to a Tremec six-speed manual gearbox, the engine blasts power to the rear wheels through a production 2009 modified gear ratio in the rear end. An abundance of fade resistant stopping power comes from Stop-Tech brakes. Up front, the six-piston calipers clamp 380-millimetre rotors, while in the rear, four-pot calipers work with 355-mm rotors. Developed by KW, the race suspension and brake upgrades came from a proven hero — the Dodge Viper ACR, which just broke the production car lap record at the world-renown Nurburgring in Germany. With only a few exceptions, the Dodge Challenger Targa was built using parts available through Mopar.
Pages: 1 2